Why Samsung WF45K6200A fills with the wrong water temperature?
- MMary WashingtonSep 8, 2025
If your Samsung Washer is filling with the wrong water temperature, consider the following: * Fully open both the hot and cold water taps. * Ensure the temperature selection on the washer is correct. * Make sure the hoses are connected to the correct taps. * Flush the water lines to remove any stagnant water. * Ensure your water heater is set to supply hot water with a minimum temperature of 120 °F (49 °C) at the tap. * Disconnect the hoses and clean the mesh filter.











