Installing the software | 23
Installing the software
After you have set up your machine and connected it to your computer, you must install the
printer software. Download the software from the Samsung website and install
(www.samsung.com/sec/support/
> find your product > Support or Downloads).
Before installing, check whether your computer’s OS support the software (see"Operating
System" on page 7).
A locally connected machine is a machine directly attached to your computer using the
cable. If your machine is attached to a network, skip the following steps below and go on
to installing a network connected machine’s driver (see "Installing driver over the
network" on page 38).
Only use a USB cable no longer than 3 meters (118 inches).
To Next Page
Loading...
