Using SyncThru™ Web Service | 45
Using SyncThru™ Web Service
There are several programs available to setup the network settings easily in a network
environment. For the network administrator especially, managing several machines on the
network is possible.
• Internet Explorer 8.0 or higher is the minimum requirement for SyncThru™ Web
Service.
• Before using the programs below, set the IP address first.
• Some features and optional goods may not be available depending on model or country
(see "Variety feature" on page 9).
SyncThru™ Web Service
The web server embedded on your network machine allows you to do the following tasks:
• Check the supplies information and status.
• Customize machine settings.
• Configure the network parameters necessary for the machine to connect to various network
environments.
Accessing SyncThru™ Web Service
1 Access a web browser, such as Internet Explorer, from Windows.
Enter the machine IP address of your printer (http://xxx.xxx.xxx.xxx) in the address field and
press the Enter key or click Go.
2 Your machine’s embedded website opens.
Logging into SyncThru™ Web Service
Before configuring options in SyncThru™ Web Service, you need to log-in as an administrator.
You can still use SyncThru™ Web Service without logging in but you won’t have access to
Settings tab and Security tab.
1 Click Login on the upper right of the SyncThru™ Web Service website.
2 If it’s your first time logging into SyncThru™ Web Service you need to log-in as an
administrator. Type in default ID (admin). Default password is sec00000. We recommend
you to set the default password for security reasons. You can change your ID and password
from Security > System Security > System Administrator.
To Next Page
Loading...
