Wireless network setup | 43
Using SyncThru™ Web Service
Before starting wireless parameter configuration, check the cable connection status.
1 Check whether or not the network cable is connected to the machine. If not, connect the
machine with a standard network cable.
2 Start a web browser such as Internet Explorer, Safari, or Firefox and enter your machine’s
new IP address in the browser window.
For example,
3 Click Login on the upper right of the SyncThru™ Web Service website.
4 If it’s your first time logging into SyncThru™ Web Service you need to log-in as an
administrator. Type in default ID (admin). Default password is sec00000. We recommend
you to set the default password for security reasons. You can change your ID and password
from Security > System Security > System Administrator.
5 When the SyncThru™ Web Service window opens, click Network Settings.
6 Click Wi-Fi > Wizard.
7 Select the one Network Name(SSID) in the list.
8 Click Next.
If the wireless security setting window appears, enter the registered password (network
password) and click Next.
9 The confirmation window appears, please check your wireless setup. If the setup is right,
click Apply.
Setting the Wi-Fi Direct for mobile printing
Wi-Fi Direct is a secure and easy-to-use peer-to-peer connection between a Wi-Fi Direct-enabled
printer and mobile device.
With Wi-Fi Direct, you can connect your printer to a Wi-Fi Direct network while concurrently
connecting to an access point. You can also use a wired network and a Wi-Fi Direct network
simultaneously so multiple users can access and print documents both from Wi-Fi Direct and
from a wired network.
To Next Page
Loading...
