S&C TripSaver II User Guide

September 12, 2022
© S&C Electric Company 2017-2022, all rights reserved
Instruction Sheet 461-508LD
TripSaver® II Cutout-Mounted Recloser
Controller Module and USB Transceiver User Guide
Table of Contents
Introduction ................................ 2
Qualified Persons ........................... 2
Read this Instruction Sheet ................... 2
Proper Application .......................... 2
Retain this Instruction Sheet. . . . . . . . . . . . . . . . . . . 2
Safety Information .......................... 3
Understanding Safety-Alert Messages ........... 3
Replacement Instructions and Labels ........... 3
Specifications .............................. 4
TripSaver II Cutout-Mounted Recloser Control
Module Integration ........................ 4
TripSaver II Cutout-Mounted Recloser USB
Transceiver .............................. 5
Hardware .................................. 6
Contents of TripSaver II Recloser Kit ............ 7
Inspection ................................. 8
Packing and Storage ........................ 8
Software ................................... 9
Downloading Software ....................... 9
Installing Software .......................... 9
Launching Software ......................... 9
Connect to a TripSaver II Recloser .......... 10
Controller Module Specifications ........... 14
Battery Information ..........................15
Appendix A ............................... 16
Regulatory Information .......................16

S&C TripSaver II Specifications

General

Number of Operations to Lockout	4
Operating Mechanism	Magnetic actuator
BIL	110 kV, 150 kV
Control Type	Microprocessor-based
Reclosing Time	Adjustable
Operating Temperature Range	-40°C to +55°C
Weight	Approximately 45 kg (100 lbs)
Voltage Rating	15.5 kV, 27 kV