Sandel SN3308 - Page 82

7-6
7
SN3308 On-screen Messages
CHAPTER
Display Item Source Notes
LORAN SELECTED EXTERNALLY Pilot This message appears when the
SN3308 is slaved to an external
loran/NAV switch/annunciator
panel and it is first placed in loran
position changing the SN3308
display from NAV1 to loran1.
Map Cntl SRC Check FAILED, POST These messages indicate that the
Map Data CRC Check FAILED, upload of the map database to
Map Cntl Contains Errors the unit was not completed
successfully or the file was
corrupted. Repeat the upload
procedure. Contact Sandel
technical support if the messages
reoccur. Note 5
Map Format Conflict POST Indicates a mismatch between the
operating software version and
the map database. Check the
Sandel website to ensure that you
have the latest versions of
operating software and database
and repeat the upload procedure.
Note 5
NAV1 TUNED TO ILS Pilot Appears when VHF NAV1 is tuned
to an ILS frequency overriding and
changing the SN3308 current NAV
selection.
NavData Expires ddmmmyy, BA POST Expiration date of internal
Jeppesen database. The two
letters following are an internal
software code.
NAV2 TUNED TO ILS Pilot Same as above, except pertains to
NAV2.
RS232 PORT-0 OVERFLOW System An internal error message which
should never appear.