12
Clock Setting
When the microwave is connected to the mains power, the LED display will show “0:00”, and the microwave
will sound once. Please ensure that you have set the clock prior to use.
Please follow the steps below to set the clock.
1. Press the Clock/Kitchen Timer button and
the hour digits will ash.
2. Turn the Timer/Weight/Auto Menu dial to
adjust the hour digits. The input time has to
be within 0-23.
3. Press the Clock/Kitchen Timer button and
the minute digits will ash.
4. Turn the Timer/Weight/Auto Menu dial to
adjust the minute digits, the input time has to
be within 0-59.
5. Press the Clock/Kitchen Timer button again
to complete the clock setting.
“:” will start ashing and the time will
illuminate to conrm that the clock setting is
complete.
2, 4
1, 3, 5
• This is a 24-hour clock. When the
microwave is connected to the mains
power for the rst time or when
the power is resumed after a power
interruption, the LED display will show
“0:00”. To re-set the clock, simply follow
the above 5 steps.
• In the process of clock setting, if the
Stop/Clear button is pressed or if there
is no operation within 1 minute, the
microwave will go back to the previous
status automatically.
• If the clock needs to be reset, please
repeat steps 1 to 5.
• To nd out the current time while the
microwave is operating, press the Clock/
Kitchen Timer button. It will last for 2-3
seconds and then return to its original
display.
S25CSS11_IB_final111018.indd 12 18/10/2011 12:35 PM
To Next Page
Loading...