General Operation
Powering ON/OFF
When you rst connect the unit to the mains socket, the unit will be in STANDBY mode and
the STANDBY button will be red.
• Press the STANDBY
button on the unit or the remote control to switch the unit on.
The STANDBY button will light up blue.
• Press the STANDBY
button on the unit or the remote control to switch the unit back
to standby mode. The STANDBY button will light up red.
• Disconnect the mains plug from the mains socket if you want to switch the unit o
completely.
Selecting Modes
Tap the icon repeatedly on the unit to switch between DISC, USB, TUNER, DAB,
Docking, Bluetooth and AUX modes. The selected mode will show on the display.
Alternatively press the USB, FM/DAB, DOCK/BT, AUX or DISC button on the remote control
to select the desired mode.
• If there is no signal under the USB, DOCK, Bluetooth, AUX and DISC mode, the unit will
automatically switch o within 15 minutes.
• Please turn the unit o completely to save energy when not in use.
Adjusting the Volume
• Turn the VOLUME + / – dial on the unit or press the VOLUME + / – buttons on the
remote control to adjust the volume.
• If you wish to turn the sound o, press the MUTE button on the remote control. Press
the MUTE button again or press the VOLUME + button on the remote control or turn
the VOLUME + / – dial clockwise to resume normal listening volume.
Adjusting the Sound Eect
Press the POP, JAZZ, ROCK, CLASSIC or FLAT buttons to select a desired music mode.
Adjusting the Bass
Press the BASS + / – buttons to select the bass level.
Adjusting the Brightness
Press the DIM + / – buttons to select the brightness level.
Time Display
Press the CLOCK button to show the current time on the display for few a seconds.
15
SDABTIP12_IB_130624_candice.indd 15 24/06/2013 2:43 PM
To Next Page
Loading...
