EasyManua.ls Logo

Sandstrom SDABTIP12 - Auto Setting the Clock; Manual Setting of the Clock; Setting the Daily Timer; Setting the Sleep Timer

Sandstrom SDABTIP12
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Auto Setting the Clock
In DAB/FM mode, press RDS/INFO button repeatedly until RDS CLOCKS shows on the display. Once
RDS CLOCKS has been selected, the clock will automatically update.
Manual Setting of the Clock
Manual Setting of the clock can only be done in STANDBY mode.
1. In STANDBY mode, press and hold the CLOCK button on the remote control until the
hour digits are ashing.
2. Press the
buttons on the remote control to adjust the hour digits while ashing,
then press the CLOCK buttons on the remote control to conrm, then the minute digits
will ash.
3. Press the
buttons to adjust the minute digits while ashing, then press the CLOCK
buttons on the remote control to conrm.
4. Each activated state will be cleared if any buttons are not pressed within 15 seconds.
Setting the Daily Timer
1. In STANDBY mode, press and hold the TIMER button on the remote control until the
display shows TIMER SET”.
2. Press the
buttons on the remote control to select USB, TUNER, DOCK, DISC, or DAB
mode, and then press the TIMER buttons on the remote control to conrm.
3. The display will show the volume level and ash. Press the
buttons on the remote
control to adjust the volume to Vol 8 (minimum), and then press the TIMER buttons on
the remote control to conrm.
4. The hour digits will ash on the display. Press the
buttons on the remote control
to adjust the hour digits, and then press the TIMER buttons on the remote control to
conrm.
5. The minute digits will ash on the display. Press the
buttons on the remote control
to adjust the minute digits, and then press the TIMER buttons on the remote control to
conrm.
6. The display will show the selected timer and “ON” will ash on the display. Press the
buttons on the remote control to select “ON” to enable the timer, otherwise select “OFF”
to disable the timer. Press the TIMER buttons on the remote control to conrm.
Setting the Sleep Timer
• Each enabled state will be cleared if a button is not pressed within 15 seconds.
• While the daily timer is active, when USB, DOCK or DISK mode has invalid play le detected will set to
FM mode.
• The DAB/FM timer will go to the last station you tuned into.
16
SDABTIP12_IB_130624_candice.indd 16 24/06/2013 2:43 PM

Table of Contents

Related product manuals