EasyManua.ls Logo

Sandstrom SDABTIP12 - System Reset; Software Version

Sandstrom SDABTIP12
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Use the sleep timer to turn the system o after a certain number of minutes in play mode.
By setting the sleep timer, you can fall asleep to music and know that your system will turn
o by itself rather than play all night.
1. To set the sleep timer press the SLEEP button on the remote control repeatedly to view
the dierent timer settings. The number of minutes shown will display in this sequence:
SLEEP 120 SLEEP 90
SLEEP 00 SLEEP 10 SLEEP 15
SLEEP 60 SLEEP 30
2. The system is now set to turn o after the number of minutes you have set. The
display will show SLEEP #, e.g. “SLEEP 10 means the unit will switch itself o after 10
minutes, “SLEEP 15 means the unit will switch itself o after 15 minutes, and so on.
3. Press the SLEEP button to show the reminding time till the unit switches o minutes
and return back to previous screen.
4. To cancel the sleep timer press the SLEEP button repeatedly until SLEEP 00 shows on
the display.
System Reset
There may be times when you need to reset your unit back to the factory settings especially
when you have moved house. If you experience reception problems you may want to reset
and try again. If you move to another part of the country and pick up the local and national
DAB stations in that area, your previously tuned channels may no longer be available.
1. Press the FM/DAB button to select FM or DAB mode.
2. Press the MENU button, the display will show SYSTEM”.
3. Press the ENTER button to select, and RESET will show on the display.
4. Press the
or button to select Y, and then press the ENTER button to select.
Otherwise select “N to cancel.
5. Press the rest is complete, the unit will start scanning for DAB channels immediately.
After the system reset, all the tuned stations, DAB, & FM preset stations will be erased.
Software Version
1. To view the software version, press the FM/DAB button to select FM or DAB mode.
2. Press the MENU button, the display will show SYSTEM”.
3. Press the ENTER button to select, and SW will show on the display.
4. Press the MENU button to exit.
17
SDABTIP12_IB_130624_candice.indd 17 24/06/2013 2:43 PM

Table of Contents

Related product manuals