Sandstrom SDBXHFB13 - Other Features; Adjusting the Sound Effect; Selecting Super Bass; Selecting the Loudness Effect

27
Specifications
Model SDBXHFB13
Frequency Range DAB: 174.928 – 239.200 MHz FM: 87.5 – 108 MHz
Power Supply
Power Consumption
AC 220V-240V~50/60Hz
≤ 30W
Standby Power Consumption ≤ 0.5W
Speaker Output Power 20W x 2
Net Weight Main Unit: 1.14 kg Speaker: 1.71 kg
Dimensions: Main Unit: 160mm (W) x 225mm (D) x 80mm (H)
Speaker: 130mm (W) x 170mm (D) x 205mm (H)
Features and specications are subject to change without prior notice.
Other Features
Adjusting the Sound Eect
Press the P-EQ button repeatedly to select the sound eect modes: jazz, rock, classic, at and pop.
Selecting Super Bass
You can reinforce the bass sound to maintain rich, full bass at low volume.
• Press the S-BASS button. The word ‘BASS’ will be displayed. To switch o, press again.
Selecting the Loudness Eect
The loudness function boosts the bass sound at low volumes with progressively lower
levels of bass boost as the volume level is increased.
• Press the LOUDNESS button. The word ‘LOUD’ will be displayed. To switch o, press again.
You cannot activate Super Bass and Loudness at the same time.
Adjusting the Display Brightness
Press the DIM button to scroll through the 3 brightness levels.
Cleaning the Unit
Ensure the unit is fully unplugged from the mains socket before cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning uids containing alcohol, ammonia or abrasives.
• Do not spray an aerosol at or near the unit.
SDBXHFB13_IB Sandstrøm.indd 27 15/05/2013 13:26