13
Removing the Plastic Strip
Remove the plastic strip from the battery if the battery
is being used for the rst time. It is located at the
bottom back side of the remote control.
Installation of Battery
1. Unscrew the screw at the back of the remote control.
• Pull out the battery compartment with your ngernails.
2. Replace a new battery (size CR2025) correctly
and fully insert the battery compartment back
to the original position. Replace the screw.
Handling the Remote Control
• Be aware of your ngernails when removing the battery cover and the battery.
• Do not drop the remote control.
• Do not allow anything to impact the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long period of time,
as corrosion or battery leakage may occur and result in physical injury, and/or property
damage, and/or re.
SDBXHFB13_IB Sandstrøm.indd 13 15/05/2013 13:26
To Next Page
Loading...
