TPMS1209C01 User Manual
Page 9 of 23
V. System Time Inquiry and Programming
Set the time when using the product for first time. The monitor provides 24 hours time system inquiry and
programming. Even though the monitor is powered off, the inside clock is still in operation. The alarm
information and alarm time will be saved into the monitor when alarm was issued.
Under the normal mode, press E key for 3 seconds to enter the monitor
programming interface, the screen displays the index interface 1.
Press S key to adjust the index interface to interface 4, then press E key to
enter the time inquiry and programming interface.
System time inquiry
The 1” stands for first interface. The screen displays the year and month,
“08” stands for year 2008 and “10” stands for October. Press S key will go
through the year/ month/ date/ hour/ minute/ second in turn.
The “2” stands for second interface. The screen displays the date and hour,
“20” stands for date 20 and “10” stands for 10 am. Then time is 10 o’clock,
20th.
The “3” stands for third interface. The screen displays the minute and
second, “30” stands for 30 minutes and “50” stands for 50 seconds.
Press S key for a certain time to return to index interface 4.
To Next Page
Loading...
Need help?
General