User’sManualSanliLS40/12
• Before starting the engine, please read thoroughly the instructions
regardingsafeuseofthemower(seepages5–7).
• Slide the throttle lever to and fro several times to ensure that it is
movingsmoothlyandcorrectly.
• Check that the fuel tap is in the ON position
(fig.11) and that the
engine’soilleveliscorrect(seeparagraph3.12).
• Start the mower in a clear, level area. Do not start the engine if the
cutting blade is resting on rough and uncut grass as this may cause
difficultiesatstart‐up.
• Foracoldstart,
movethethrottlelevertothepositionmarked:
• Forahotstart,movethelevertotheposi tion marked:
• Stand behind the handlebars. Move the operator control lever
positioned in front of the handlebars rearwards so that the lever is
resting against the handlebars (fig.12). Take hold of the
starter handle
firmlywiththeotherhand.
• Pull back the starter until you feel resistance and then pull thehandle
firmlyandbrisklytoturntheengine(fig.13).
• Repeattheaboveprocedureasnecessaryuntiltheenginestarts.
• Whenstartingfromcold,graduallymovethethrottlelever
to
• the full throttle position (as shown right) after a few moments
ofrunning.
WARNING:Thecuttingbladeturnswhentheengineisbeingstarted.
3.22 Stoppingthemower
To Next Page
