SANLI LS 40 - Specifications



User’sManualSanliLS40/18
with the air filter and carburettor uppermost. Allow the oil to drain
completelyintothecontainer.Returnthemowerontoitsfourwheelsandfill
theenginewithnewoilasdescribedinsection3.12

Note:Disposeofusedengineoilcarefully,responsiblyandin accordancewith
localornationalregulations.
3.34 Maintenanceschedule
Summaryofregularmaintenancerequiredbythemower

Frequency
Components
Before
eachmowing
After5hours Every 25 hours or once a year
minimumbeforewinterlay‐up
Cuttingsystem Check and
verify its
condition
 Sharpen and balance blade.
Replace worn or damaged
blade.
Sparkplug  Check Clean and check the clearance
of theelectrodes. Replace if
necessary.
AirFilter  Check Clean the filter. Replace if
necessary.
Oil Checkthelevel Drainandrenew Drainandrenew

4.Specifications
Consistent with our policy of continuous improvement, SANLI reserves the
right to change the design and configuration of any of its products without
notice or obligation. Therefore, please treat the text and images in this
manualasbeingforillustrativepurposesonly.Theymayinnocaseserveasa
basis
foranylegalclaim.

Model LS40