User’sManualSanliLS40/17
use clean engine oil for this). Insert the filter cartridge into its housing and
replacetheairboxlid,ensuringthateachcomponentisinplaceandproperly
installed.
If the filter cartridge is damaged or is very dirty, replace it using a genuine
SANLIpart.
WARNING:Donottwistthecartridgetocleanfoam,asyoucoulddamageit.
TheSANLILSP46mowerisequippedwithadualfiltrationsystemcomprisinga
foampre‐filteranda cartridgefilterpaper.
The maintenance of a foam pre‐filter is identical to that of a foam cartridge
filter,as describedabove.Thecartridgefilterpapershouldbecleanedwitha
vacuumcleaner.
Ifitisdirtyorcontaminatedwithoilorpetrol,replaceit.
Clean the cover and inside of the air box with a clean cloth. Evenly apply a
thinlayerofoiltotheoutsideofthecartridgefilterwithabrush(youcanuse
clean engine oil for this).
Replace the filter cartridge in its housing and then
replace the lid of the air box, ensuring that each component is in place and
properlyinstalled.
EngineOil
Checkingtheoillevel
Positionthemoweronafirm,levelsurface.Unscrew
theoilleveldipstick (fig.18) andwipedry.Insert
the
dipstick until it reaches the filler neck, but do not
screwin.Removethedipstickandchecktheoillevel
holding the dipstick horizontal. The oil level should
be between the minimum and maximum oil level
marks on the dipstick (fig.19).Add oil if necessary
andrepeat the above checking
process.Running the
enginewithoutoilorwithtoolittleoilcancauseseriousenginedamage.
Changingtheoil
Thefirstoilchangeshouldbecarriedoutafterthefirst5hoursofmoweruse.
Thereafter,changetheoilafterevery25hours’useoratleastonceayear.
Leave the engine running outdoors for several minutes to warm the oil and
makeitmorefluid.Warning:Partsoftheenginewillbecomeveryhotandcan
causesevereburns.
Removethesparkplugcapandunscrewtheoilleveldipstick.Placeasuitable
containerbeneaththemower’soil
fillerpipeandtiltthemowerontoitsside
To Next Page
Loading...
