SANLI PCS355 - Upper Handle Assembly; Attaching the Drive Cable; Fit the Cable Clip; Attach the Grass Catcher

2
3
PAGE 5
2. UPPER HANDLE ASSEMBLY
2
3
4
3
4
2a. 2b.
5.
6. 7.
ASSEMBLY GUIDELINES
5
5
Parts required:
3. Attaching the Drive Cable
3a
. Pull the drive lever out of the
left side hole and lower towards the
mower.
3b.
the mower handle
4. Fit the Cable Clip
Push the cable Clip into place.
5. Attach the Grass Catcher
Lift the Rear Flap with one hand.
3. ATTACHING THE DRIVE CABLE (PCS350S ONLY) 4. FIT THE CABLE CLIP
4.
6. Attach the Grass Catcher
Lower the Grass Catcher hook onto
bar.
7.
Machine is now assembled.
3a. 3b.