Need help?Do you have a question about the Sansui AU-X711 and is the answer not in the manual?
General| Power Output | 90 watts per channel into 8Ω (stereo) |
|---|---|
| Frequency Response | DC to 300kHz (±3 dB) |
| Damping Factor | 100 |
| Input Sensitivity (Line) | 150 mV |
| Signal-to-Noise Ratio | 100 dB |
| Dimensions | 430 x 152 x 403mm |
| Weight | 13.2kg |
| Channel separation | 70 dB |
| Input sensitivity | 2.5mV (MM), 250mV (line) |
| Signal to noise ratio | 85dB (MM), 110dB (line) |
| Speaker load impedance | 4Ω - 16Ω |
To Next Page
