To connect the TV to a DVD player with component video
If your DVD player has component video out jacks, connect your TV to a DVD player using a component video
cord. It can greatly enhance picture quality and performance.
NOTE:
This unit is only capable of displaying 480i interlaced signal when connected to a digital device with component video
outputs. If you input a 480p, 720p or 1080i signal to the component video inputs, “COMPONENT” and “NO SIGNAL
OR NOT SUPPORTED VIDEO RESOLUTION”
will be displayed on a black screen. If this screen appears, set the
digital device’s component output to 480i.
To connect the TV to a DTV receiver/set-top box
If you connect a DTV receiver/set-top box, connect your TV to it by using a component video cord.
NOTE:
This unit is only capable of displaying 480i interlaced signal when connected to a digital device with component video
outputs. If you input a 480p, 720p or 1080i signal to the component video inputs, “COMPONENT” and “NO SIGNAL
OR NOT SUPPORTED VIDEO RESOLUTION”
will be displayed on a black screen. If this screen appears, set the
digital device’s component output to 480i.
To connect an audio system
AUDIO cord (not supplied)
Amplifier
To AUDI
O IN
To AUDI
O OUT
Rear of the TV
Connections to other equipment (continued)
Rear of the TV
To COMPONENT OUTTo AUDIO OUT
AUDIO cord (not supplied)
VIDEO cord (not supplied)
To COMPONENT IN
To COMPONENT OUTTo AUDIO OUT
AUDIO cord (not supplied)
VIDEO cord (not supplied)
To COMPONENT IN
Rear of the TV
To Next Page
Loading...
