Press MENU/ENTER. The menu screen appears.
Press
or
to select (OPTION)
menu, then press or to select
“V-CHIP”.
Press to display the password
entering mode. Use the number
buttons (0-9) to enter your password,
then press MENU/ENTER.
The V-CHIP menu appears.
Press or to select “CHANGE
PASSWORD”, then press .
Enter a new password using the
number buttons (0-9), then press
MENU/ENTER.
Enter the same password again to
confirm, then press
MENU/ENTER.
Press MENU/ENTER repeatedly until the menu screen is cleared.
Otherwise, press EXIT to return to the normal screen immediately.
Setting the V-Chip (continued)
To change the password
1
2
3
4
5
6
7
To Next Page
