Sansui HDLCDVD325 - Dynamic Range Control

53
/Enter/Setup/Return
1
Press SETUP/TV MENU
in the stop mode or No
Disc.
Press
or to select
option.
2
Press or ENTER to
select “DRC”.
3
Press or to select
“On” or “Off”, then press
ENTER.
On : Loud sound such as explosion or similar is toned
down slightly when play back. This makes it
suitable for when it is connected to a stereo.
Off : It plays back at the recording level on the disk.
4
Press SETUP/TV MENU or RETURN to remove the Menu
screen.
Dynamic Range Control
DRC (Dynamic Range Control)
enables you to control the dynamic
range so as to achieve a suitable
sound for your equipment.
NOTES:
• This function works only during
playback of Dolby Digital recorded
discs.
• The level of Dynamic Range Reduc-
tion may differ depending on DVD
video disc.
DRC
/Setup/Return
On
DRC
/Setup/Return
Off
5X10101A[EN] P48-53 3/2/06, 4:05 PM53