Sansui SR-636 - Useful Hints and Maintenance; Stylus Tip Cleaning; Record Handling

24
-
mn
ill
Some useful hints
Keep the stylus tip clean ©
Dust and dirt are the major obstacles to noise-free récbicl reproduction:
When grime is allowed to collect in the record groove it will stick to the
stylus tip, thus accelerating record and stylus wear and moreover
deteriorating the quality of the reproduced sound. CD-4 records in
particular require extra care.
Every time you play a record, first carefully remove all dirt and dust
with a record cleaner; use the stylus brush to remove dirt from the
stylus tip.
In cleaning the tip, avoid touching it with your finger or subjecting it to
shock; such mistreatment may not only shorten its life but may even
dislodge the jeweled tip itself.
‘Banding the record ©
Do not touch the surface, BaseetailG ‘the grooves, of any necords.
Dust and dirt on the record surface are major causes of irritaing
noises. Clean each record's surface carefully with a quality record
cleaner before playing.
Spray-type record cleaning liquids or anti-static liquid, when over-
used, may cause tonal deterioration. You are advised therefore to
carefully read the notes attached to such products before using
them.
Do not store your records other than in vertical positions.
Avoid exposing records to excessive humidity or to direct sunlight.