EasyManua.ls Logo

Santak Castle C10K(E) - Communication Interface

Default Icon
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Intelligent slot
This series is equipped with an intelligent slot for Webpower (optional
accessory) or other optional card to achieve remote management of
the UPS through internet / intranet. Please contact your local distribu-
tor for further information.
RS232 interface
1) The following are the descriptions and pin assignment of RS232
DB-9 port:
Baud rate: 2400bps
Data bit: 8 bit
Ending bit:1bit
Parity bit: None
RS232 Interface
pin number
3
2
5
Function description
Rx
Tx
Ground
I/O
Input
Output
Ground
Optional AS400 interface
This optional AS400 card provides dry contact closure signal OPEN
or CLOSE. Following are the pin assignment and the descriptions of
AS400 card:
PIN1: UPS failure (normally open, active close)
PIN2: summary alarm
PIN3: ground
PIN4: Remote shutdown
PIN5: Common
PIN6: Bypass active (relay close)
PIN7: Battery low
PIN8: UPS On (relay close)
PIN9: Utility Power failure (normally open, active close)
DB-9 pin assignment:
6. Communication Interface
AS400 Interface
3. Operation and Operating mode

Related product manuals