Santon AH7/2.2 - Technical Specification

2
Please read and understand these instructions prior to installing your Aquaheat un-
vented water heater. Particular attention should be paid to the section headed IM-
PORTANT INSTALLATION POINTS. Following installation and commissioning
the operation of the heater should be explained to the customer and these instructions
left with them for future reference.
TECHNICAL SPECIFICATION
Electrical rating .................................................... 2.0kW @ 230V
.............................................................................. 2.2kW @ 240V
Capacities ............................................................. 7, 10 or 15 litres
Weight (full) .........................................................7 litre - 11.9 kg
...............................................................................10 litre - 15.9 kg
...............................................................................15 litre - 25.0 kg
Rated pressure ...................................................... 6 bar (0.6 MPa)
Minimum recommended supply pressure ............ 0.8 bar (0.08 MPa)
Pressure Relief Valve ...........................................6 bar (0.6 MPa)
Name Aquaheat
Model identier 7l
(2.2kW)
10l
(2.2kW)
15l
(2.2kW)
Storage volume V (litres) 7.0 10.0 15.0
Mixed water @ 40°C V40 (l) 13 17 25
Load Prole XXS XXS XXS
Energy Efciency Class C C C
Energy Efciency % 31.3 30.6 30.8
Annual electricity consumption kWh 589 603 599
Daily fuel consumption kWh 2.860 2.940 2.920
Thermostat setting 60°C
Specic precautions that shall be taken when the
water heater is assembled, installed or maintained
and disposed of at end of life.
See sections 1 to 9
Table: Technical parameters in accordance with European Commision
regulations 814/2013 and 812/2013
The HWA Charter Statement requires that all members adhere to the following:
• To supply t for purpose products clearly and honestly described.
• To supply products that meet, or exceed appropriate standards and building and
water regulations.
• To provide pre and post sales technical support.
• To provide clear and concise warranty details to customers.