SANY SR400R - Locking Recess Parameter Calibration Interface

3-62
Safety, Operation and Maintenance Manual-September 30, 2019
3.13.9 Locking recess parameter calibration interface
Click on the parameter calibration interface to enter locking recess parameter calibration inter-
face. Click
to return to the menu interface.
Fig.3-56
Click
to enter next interface of locking recess parameter calibration interface . Click to re-
turn to the menu interface.
System Function SR400R Rotary Drilling Rig
mengkf 2022-04-21 mengkf 2022-04-21 mengkf 2022-04-21
mengkf 2022-04-21 mengkf 2022-04-21 mengkf 2022-04-21
mengkf 2022-04-21 mengkf 2022-04-21 mengkf 2022-04-21
mengkf 2022-04-21 mengkf 2022-04-21 mengkf 2022-04-21