2-46
Safety, Operation and Maintenance Manual-September 30, 2019
Fig.2-73
• Protective gloves: wear gloves to avoid
possible damages during operation.
Fig.2-74
• Safety boots: wear safety boots to reduce
the possibility of foot injury.
Fig.2-75
• Protective suit: wear protective suit to
prevent hazards of burning, corrosion,
sprain or scratch on the body.
2.6.3 Keeping the drilling rig in good
service condition
Making sure the rig is in a good operation status can effectively reduce the occurrence of acci-
dents, and improve construction efficiency and equipment service life.
• The inside of cab should remain clean and neat. The operator’s personal items should be kept
where they will not affect his operation, tools, and other necessary items should be placed into
the tool case or the storage areas.
• All signs on the drilling rig are designed for the purpose of safe and proper operation. All
relevant staff should get familiar with the location and meaning of the signs, and keep the signs
intact and clear, preventing them from being covered.
• Keep the machine clean. Remove all obstacles such as broken stones, grease, tools and other
items that do not belong to the machine.
Safety SR400R Rotary Drilling Rig
mengkf 2022-04-21
mengkf 2022-04-21
mengkf 2022-04-21
mengkf 2022-04-21
mengkf 2022-04-21
mengkf 2022-04-21
mengkf 2022-04-21
mengkf 2022-04-21
mengkf 2022-04-21
mengkf 2022-04-21
mengkf 2022-04-21
mengkf 2022-04-21
To Next Page
Loading...
