SANY SR400R - Page 7

To Next Page

To Previous Page

Safety, Operation and Maintenance Manual-September 30, 2019

Important Safety Information

Most accidents that involve product operation, maintenance and repair are caused by failure to ob-

serve basic safety rules or precautions. An accident can often be avoided by recognizing poten-

tially hazardous situation before an accident occurs. A person must be alert to potential hazards.

This person should also have the necessary traning, skills and tools to perform these functions

properly. Improper operation, lubrication, maintenance or repair of this product can be dangerous

and could result in injury or death.

Do not operate any lubrication, maintenance or repair on this product, until you have read and

understood the operation, lubrication, maintenance an d repair information. Safety precautions

and warnings are provided in this manual and on the product. If these hazard warnings are not

heeded, bodily injury or death could occur to you or to other persons. The hazards are identified by

the Safety Alert Symbol by a Signal Word such as DANGER, WARNING, CAUTION OR NOTICE.

DANGER

Indicates an imminent hazard which, if not avoided, will result in serious injury or death.

WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in injury or

possibly death.

CAUTION

Indicates a possible potential hazardous situation which, if not avoided, could result in

minor or major injury.

NOTICE

Indicates a situation which can cause damage to the machine, personal property and/or

the environment, or cause the equipment to operate improperly.

SANY cannot anticipate every possible circumstance that might involve a potential hazard. The

warnings in this manual and on the product are, therefore, not all inclusive.

SR400R Rotary Drilling Rig

mengkf 2022-04-21

Related product manuals