Sanyo CDF-R800 User Manual

Clock operation
The following operations are effective while the power is on. Though the Clock dis-
play is shown when the power is off, you can not adjust nor set the time.
Clock adjust button
To adjust the time
1. See that the Clock display is shown.
Hint:
l If the Clock display is not shown, press the Display select button (
Q ) to
show the Clock display for a moment (about 5 seconds).
2. While holding down the Display select button (
~~),pressthe(~\)or(~)
side of the Clock adjust button.
To set hour digits : Press ( F\) side.
To set minute digits : Press (u) side.
Hint:
l Press and hold the button to advance the time quickly.
Notes:
0 This is a 12-hour clock.
l The clock setting is retained when the power is turned off.
To set the time to the nearest half-hour
While holding down the Display select button (
%P
ress the Audio control mode
select button (@).
The time is set as follows:
EX. lO:OO-IO:29 c3 IO:00
10:30-11 :oo G ll:oo
10

Sanyo CDF-R800 Specifications

General

Brand	Sanyo
Model	CDF-R800
Category	Car Receiver
Language	English