10
To select sound system
1) Select “SIF” with the PROGRAMME UP
or DOWN button in the Semi-auto or
Manual Tuning mode.
2) Press the VOLUME ( + or
-
) button to
select a optimum sound system.
Colour and Sound System
Normally, set the colour system to “AUTO”,
if the clear picture cannot be obtained even
when the broadcasting or AV signal is
received, press the RECALL/ COLOUR
SYSTEM button repeatedly until the
optimum image can be produced.
(Refer to Broadcast Transmission System List
indicated by the last of this page in a setup of
Colour System.)
Note: A colour system entry to the memory
cannot be made during TV mode, make it
during Semi-auto or manual tuning mode.
(Refer to page 14.)
6
AUTO
6
PAL
6
NTSC4.43
6
NTSC
To select the sound system, make it during
Semi-Auto Tuning or Manual Tuning mode.
(For further details concerning this operation
refer to page 14.)
When the sound is not clear or no sound is
produced on a programme number position,
select sound system repeatedly until the
optimum sound is obtained.
(Refer to Broadcast Transmission System List
indicated by the last of this page in a setup of
Sound System.)
BG
(5.5MHz)
DK
(6.5MHz)
I
(6.0MHz)
M
(4.5MHz)
Each time the RECALL/ COLOUR
SYSTEM button is pressed, colour
system changes as follows;
Setting of the Colour System
Setting of the Sound System
Broadcast Transmission System List
Area
Country
Sound
System
Colour
System
Middle
East
Asia
Oceania
PAL
B/G
Australia,
New Zealand, etc.
Union of Arab Emirates,
Kuwait, Oman, Qatar,
Yemen,
Bahrain,
etc.
Indonesia, Malaysia,
Singapore, Thailand,
etc.
PAL
B/G
China,
etc.
PAL
D/K
Hong kong
PAL
I
Saudi Arabia,
Iraq, Iran, Lebanon,etc.
B/G
SECAM
Russian Federation,etc.
D/K
SECAM
Myanmar, etc.
M
NTSC
To Next Page
Loading...
