Sanyo CP21MF2 - Connecting Other Equipment - AV Inputs; Connecting to AV Input Jacks; Connecting to the Front AV Input Jacks

20
Note: When signals are input both to the Front AV Input Jacks and to the Rear AV Input
Jacks, the signal input to the Front AV Input Jacks takes priority.
INPUT
OUTPUT
A
U
D
I
O
V
I
D
E
O
+ +
R
L
ANT.75
Ω
MONO
VIDEO
L-AUDIO-R
It is convenient to use the AV input jack on the front panel for equipment that is often con-
nected and disconnected.
VCR for playback
(Stereo)
Connect the video and audio outputs of a VCR, video disc player, etc. to the input jacks of
this TV set . Tapes and discs can be played back.
PLAYBACK
■ To watch video input picture, select AV position
by pressing the TV/AV Selector.
AV
(Stereo)
Video Camera,
TV Game etc.
To video and audio outputs
To video and
audio outputs
PLAYBACK
(Stereo)
Connecting to the AV Input Jacks
Connecting to the Front AV Input Jacks
When the audio signal from the VCR is stereo, be sure to connect the right and left channels
to the respective right and left AUDIO IN terminals. Then select “STEREO (AV)” channel of
the audio channel in the TV set with the remote control button.
If the external audio signal is a monaural one in this connection,
select “MONO (L)”or “MONO (R)” channel of the audio channel
in the TV set with the remote control button.
Connecting to the Rear AV Input Jacks
Connecting other Equipment
A B
A B
STEREO (AV)
MONO (L)
MONO (R)
Each time the button is pressed, the AV Stereo mode is changed as follow,
A B
INST. M_21-C5ZY-A(AUS) 9/15/03 12:49 PM Page 20