1
Press the MENU button for MAIN
menu display.
2
Select “PRESET” by pressing the
Programme UP or DOWN button.
3
Press the VOLUME + or
-
button for
PRESET menu display. On entering
PRESET display, Automatic Tuning will
be selected initially.
Semi-Auto Tuning and Manual Tuning
If it is required, Change the colour and
sound system. To enter the colour and
sound system into memory, select
“MEMORY” and press the VOLUME + or
-
button.
For example, to enter Programme Position 27,
press the Digit button, press the remote control
button 2 followed by 7. It is also possible to select
the Programme position number by pressing
either of the VOLUME + or
-
button. In this case,
select “POSITION” with the Progamme UP OR
DOWN button first, then press the VOLUME + or
- button.(Pressing the VOLUME + or
-
button will
only alter the programme position number.)
5
For example, to pre-set a required
channel onto Programme Position 6,
select “POSITION” with the
Programme UP or DOWN button and
press remote control button number 6
and enter 6. (In this case, the channel
being watched will change to channel
6.)
7
Once desired channel is located, select
“MEMORY” by pressing the
Programme UP or DOWN button.
The VOLUME + button will move tuning toward
the higher frequencies, and the VOLUME
-
button will move tuning toward the lower
frequencies.
6
Select “SEARCH” by pressing the
Programme UP or DOWN button.
Semi-Auto Tuning:
Press and release the VOLUME + or
-
button
to search for required TV station. Once a
station is located, tuning will automatically
stop. Continue till desired channel is located.
Manual Tuning :
Press and hold the VOLUME + or
-
button to
search for required TV station.
To Next Page
Loading...
