EasyManua.ls Logo

Sanyo CP21MF2 - Connecting Other Equipment - Other; AV Connection to the Aerial Socket; Presetting to Watch Video Input; Care and Cleaning

Sanyo CP21MF2
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
Power Source AC110-240 Volts, 50/60Hz
Colour System PAL/NTSC4.43/NTSC
/PAL-60Hz
Sound System B/G, I, D/KK’, M/M
Channel Coverage
Australia
VHF: 0-11, 5A (Australlia) 1-11 (New Zeland)E2-
E12, R1-R12, K1-K9, A2-A13, , J1-J12
UHF: 21-69, A14-A69, J13-J62
CATV: S1
-
S41, X, Y, Z, Z+1, Z+2
Aerial input impedance 75
Audio output (RMS) 5W + 5W (All models)
Speakers Model CP21MF2: ø 8 cm x 2 pcs.
Model CP14KX2(A), CP21KX2(A):
6 cm x 12 cm x 2 pcs.
Ext. terminals
Video inputs: Phone Jack x 2
(1.0Vp-p, impedance 75 )
Audio inputs: Phone Jack (L/R) x 2
(436mVrms, impedance
more than 40K)
Video monitor outputs: Phone Jack x 1
(1.0Vp-p, impedance 75 )
Audio monitor outputs: Phone Jack (L/R) x 1
(436mVrms, impedance less than 600)
Dimension
Model CP21MF2: 496 (W) x 470 (H) x 482 (D) mm
Model CP14KX2(A): 491 (W) x 337 (H) x 387 (D) mm
Model CP21KX2(A): 625 9W) x 461 (H) x 484 (D) mm
Weight
Model CP21MF2: approx. 21.0 Kg
Model CP14KX2(A): approx. 9.9 Kg
Model CP21KX2(A): approx. 21.2 Kg
Specifications subject to change without notice.
Connecting other Equipment
The surface of the cabinet can be damaged
if not properly maintained. Many common
household aerosol sprays, cleaning agents,
solvents and polishes will cause permanent
damage to the fine surface.
1. Unplug the power cord before cleaning
the Television.
2. Clean the screen with a soft cloth
dampened with glass cleaner or warm
water.
3. Clean the cabinet with a soft cloth
dampened with a mild household deter-
gent and warm water. Dry thoroughly.
Note: NEVER spray liquids on the screen
because they can run down and drip
onto the chassis. This may cause
component failure not covered under
Warranty.
ANT. 75
Aerial Socket
PLAYBACK
The AV apparatus can also be connected to
the aerial socket of your TV receiver.
Presetting to watch the video input
1. Playback the VCR .
2. Tune a VCR playback in programme
position that you want. (See Semi-Auto
Tuning and Manual Tuning on pages 14.)
For further details concerning this connection
and adjustment, refer to the operating instruc-
tions for the AV equipment.
Specifications
VCR for playback
AV Connection to the Aerial Socket
Care and Cleaning
INST. M_21-C5ZY-A(AUS) 9/15/03 12:49 PM Page 22

Other manuals for Sanyo CP21MF2

Related product manuals