Sanyo CP21MF2 - Tuning of the Channels - Skip; Skip Channel Set and Cancel

16
6
Press the MENU button to return to
normal TV display.
1
Enter to SEMI-AUTO or MANUAL
tuning mode. (Refer to page 13.)
2
Select “POSITION” with the
PROGRAMME UP or DOWN button.
When there is a position you do not use, Position 4
for example, by setting the SKIP Channel function
it is possible to jump over this position, when you
are selecting a channel using the PROGRAMME
UP/DOWN or CHANNEL SCAN button.
3
4
5
Skip
For example, to set programme position
“4” as Skip channel ;
4
Select “SKIP” by pressing the
PROGRAMME UP or DOWN button,
then press the VOLUME + or
- button
to set SKIP to ON. To cancel Skip
Channel function, set to OFF.
3
Press remote control “4” button to
select Programme Position 4.
Use the Digit button and PROGRAMME
SELECTOR (Number buttons) to enter
Programme Number. Do not use the VOLUME +
or
- button to enter programme position in this
settings.
5
Select “MEMORY” by pressing the
PROGRAMME UP or DOWN button,
then press the VOLUME + or - button
for memory.
Any number of channels maybe set as Skip
Channels.
SELECT ADJUST BACK
P
P
M
EXIT
SEARCH
POSITION
SYSTEM
SKIP
MODE
SIF
MEMORY
SEMI
START
4
AUTO
BG
OFF
--
SELECT ADJUST BACK
P
P
M
EXIT
SEARCH
POSITION
SYSTEM
SKIP
MODE
SIF
MEMORY
SEMI
START
4
AUTO
BG
ON
--
SELECT ADJUST BACK
P
P
M
EXIT
SEARCH
POSITION
SYSTEM
SKIP
MODE
SIF
MEMORY
SEMI
START
4
AUTO
BG
ON
OK
Skip Channel Set and Cancel
Tuning of the Channels
SELECT ADJUST BACK
P
P
M
EXIT
SEARCH
POSITION
SYSTEM
SKIP
MODE
SIF
MEMORY
SEMI
START
6
AUTO
BG
OFF
--
INST. M_21-C5ZY-A(AUS) 9/15/03 12:49 PM Page 16