CD CAHNGER OPERATION DESCRIPTION
4. When the TRAY closes and it reaches the tip of RIB part of
LEFT TRAY GUIDE, the LOCK LEVER is lowered to release
the TRAY, and loading proceeds.
TRAY GUIDE HOLDER
LOCK LEVER
I
OPEN
-
CLOSE
(2)LOADING
TRAY LOCK
TRAYRELEASE
1. The rotation of the LOAD/UNLOAD MOTOR rotates the
LOAD/UNLOAD DRIVE GEAR in the clockwise direction.
2. The DRIVE GEAR and the gear portion of the TRAY
meshtogether and the TRAY movers backward.
3. The completion of TRAY movement causes the UP/DOWN
MOTOR to operate and lower the TRAY HOLDER putting
the until to chucking status.
4. The rotation of the UP/DOWN MOTOR rotates the UP/
DOWN GEAR in the counter-clockwise direction. In
connection with this, the TRAY HOLDER SLIDE moves
forward, and at the same time, the RIGHT SLIDE is moved
backwards by the SYNCHRO LEVER.
TRAY HOLDER
SYNCRb
LEVER
LOAD/UNLOAD DRIVE GEAR
A
dl
LOAD/UNLOAD CAM GEAR
LOAD/UNLOAD MOTOR
UNLOAD IDLER
1
ILOADIUNLOAD
DRIVE GEAR
UP/DOWN CAM GEAR 1
UP/DOWN IDLER 2
UP/DOWN DRIVE
GEAR,1
/
Uq/DOWN IDLER 1
A” HOLDER SLIDE
LEFT SIDE
SRAC
TRAY HOLDER
UP/DOWN
DRIVE FEAR 1
/
UP/DO’iN
\
I
CAM GEAR 1
$-&‘-T
_
UP/DOWN
UP/DOWN IDLER 1
R,G”T
SLIDE BRACKET
UP/DOWN
DRIVE GEAR 2
\
‘UP/DOWN
IDLER 2
DOWN MOTOR
MOTOR
UP/DOWN
CAM GEAR 2
-6-
To Next Page
Loading...
