Sanyo DC-F320 - CD Changer Component Setup

CD CHANGER REPLACEMENT
4. LEFT SLIDE BRACKET
5. UP/DOWN CAM GEAR
6. SETTING UP THE LOAD/UNLOAD GEAR
dl
LOAD/UNLOAD CAM GEAR
7.
LOAD/UNLOAD MOTOR
AD/UNLOAD IDLER 1
DNNLOAD IDLER 2
LLOAD/UNLOAD
DRIVE GEAR
SETTING UP THE TRAY SLIDE AND UP/DOWN
DRIVE GEAR 2
1. Slide the TRAY SLIDE forward until it goes no further.
2. Align the round mark on the UP/DOWN DRIVE GEAR
2. with the mark area on the TRAY SLIDE, and install.
3. Align the shorter flat part of the UP/DOWN CAM GEAR
2, and install.
l Set the parts in such a way that the round marks on
the two GEARS are horizontal.
8.
8 LOAD/UNLOAD
---
-I OF THE LUBRICATION
---
J
c----------------
Note:
1
EM-50L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MOLYKOTE,
EMdOL
I
SG-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SAN
GREASE,
SG-7
I
G-474B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FLOIL OIL,
G-4748
I
_-_-_-_--_-_-_-_-__--_--_J
9. TRAY HOLDER
UP/DOWN
DRIVE GEAR 2
LONG
CAM GEAR 2
All manuals and user guides at all-guides.com