DISASSEMBLE OF THE CD MECHANISM
2) Grease application guide for loading chassis
Be sure not to get grease on your hands when handling
the loading chassis. Apply grease only to designated
areas of the loading shaft.
Apply grease (EM50L) to the areas shown shaded in the
pfi”’’’:!=(,ulul
illustration.
?
REAR FACE
.}
. /--
,:-’”
.-
.,., ,,
..-.-,,. ,
--
,. .,. ~
REAR FACE - ““’
m “~gj:$::)
INNER SLIT
BOTTOM LIB FACE . . . . .. . ... . ,.,, <:,.
3) Grease application guide for base up/down slide
Apply grease (EM50L) to the areas shown shaded in the
illustration.
4) Grease application guide for base mechanism chassis
Apply grease (FLOIL G-474B) to the areas shown shaded
in the illustration.