Sanyo DC-MS1 Service Manual

“i
SERVICE MODE (CD)
3. CD operation display mode
Press the TIME key from service mode entry status to enter this mode.
When this mode is activated, the function
becomes CD. When the unit is powered off, it automatically powers on again.
In this mode while the function is CD, the LCD display shows special indications, different from the normal display, that
show the CD operations. (See Table 2 and Table 3.).
In this mode, a calendar number of the sort shown in Table 4 appears if a CD error occurs. Also, the CD operation display
and calendar display freeze from the point at which an error occurs onward. The display can be “unfrozen” by pressing
the
STOP key when the CD is stopped.
. The
mode is released when the power is turned off
I TRACK No. I MEANING
I
1
I Stop in progress
2
I
Plav in oroaress
13
I Fast forward toward outer edae in rxo~ress ]
1
4
I Fast forward toward inner edge
in progress
I
TRACK No. MEANING
5 Pause in progress
6 Tray open in progress
7
Tray close in progress
8
TOC
read in progress
TABLE 2: DISPLAYS DURING
THE CD OPERATION MODE (OUTLINE = TRACK No. PART)
I TRACK I MIN. I SEC. I MEANING
dle break in progress
1
1
0 Spire
1
2 0 Pickup return ‘- ‘v--”-”-
11
TRACK
MIN.
SEC.
MEANING
3 1
0 Fast forward toward outer edge in
oroaress (16-track iumo)
“““’”y’”””------i
t
I
1
1
,“.
. .
3!2 O IFast forward toward outer edge in I
1+-R--R ‘“n”““’’’’;*”’””
I
w.vy, .,- “.- ..”.,.-.,
I
L i d lPlay start
212
0 I
Focus search in progress
1
#
,
2]3
O lSpindle kick in progress
1
I(compulsively accelerate)
I
I 2 I 4 I O lSona access start (oosition check) I
I
1
t
I
. .
2 [4111-
Song access (quick access)
1
I 2 \ 4 I 2 lSong access
I
Ill
I(oosition check after auick access) I
progress (subcode read)
4
0 0 Fast forward toward inner edge start
4
1
0
Fast forward toward inner edge in
progress (16-track jump)
4
“2
o Fast forward towardhm~?:edge in
oroaress (subcode read)
5 0 0
Pause in progress (1-track jump)
5 1 0 Pause in progress (trace)
1
.,
2
4 3
Song access (outer edge 64-track jump)
6 ‘
o Stop processing in progress with tray
2
4 4 Song access (inner edge 64-track jump)
open
2
4
6
0
5 Song access (outer edge 16-track jump)
~ o
0 Tray open in progress
2
4
6 Song access (inner edge 16-track jump)
~ o
0 Tray close in progress
2
4 7 Song access (inner edge 1-track
jump)
o Pickup return in progress
2
5
0 Song access (subcode read)
8
1 0 Focus search start
2
6
0 Play in progress
8 2
0 Spindle kick in progress
2
0 0 Play in progress
(compulsively accelerate)
8 3 0 Subcode read
3
0 0 Fast forward toward outer edge start
8 4
0 TOC read in progress
TABLE 3: DISPLAYS DURING THE CD OPERATION MODE (TRACK
No., MINIT & SECOND PART)
No.
STATE OF CD ERROR
No. STATE OF CD ERROR
Good 5 The subcode is not input while the servo is on.
1 Focusing is not possible in focus search.
6
Tray open cannot complete.
2
The subcode is not input during disc startup.
7 Tray close cannot complete.
3 TOC cannot be read. 8
Panel open cannot complete.
4
The focus was lost while the servo was on. 9
Panel close cannot complete
TABLE 4: DISPLAY OF CD ERRORS (MUSIC CALENDER
No. PART)
-14-

Sanyo DC-MS1 Specifications

General

Brand	Sanyo
Model	DC-MS1
Category	CD Player
Language	English