SETUP
25
Initial Setup
VCR Record Quality
You can set the default VCR recording quality to SP (Standard Play) or LP
(Long Play). SP is higher quality, but LP provides 2 times the recording
time; e.g., a 2 hour tape will record for 4 hours in LP mode.
Follow the same procedure as the ‘DVD Record Quality’.
Auto Chapter
During recording, chapter markers are added automatically at fixed
intervals. You can set this interval to 5 minutes, 10 minutes or 15
minutes. To turn off automatic chapter marking, select ‘Off‘.
Follow the same procedure as the ‘DVD Record Quality’.
Recording Options
DVD Record Quality SP
VCR Record Quality SP
Auto Chapter 5 min
Instructions
Enter-Confirm Setup-Exit
Move …†
Select VCR
Quality
LP
SP
Recording Options
DVD Record Quality SP
VCR Record Quality SP
Auto Chapter 5 min
Instructions
Enter-Confirm Setup-Exit
Move …†
Select Auto
Chapter
Off
5min
10min
15min
OSD Language
Select a language for the DVD Recorder+VCR Setup menu and on-
screen displays.
1
Press [SETUP]. The Setup menu appears.
2
Use [œ] and [√] to select ‘Languages‘.
3
While ‘Languages‘ is selected, press [†] to select ‘OSD Language‘.
4
Press [ENTER] to move to the second level.
5
Use […/†] to select the desired language.
6
Press [ENTER] to confirm your selection, then press [SETUP] to exit
the menu.
LANGUAGE Settings
Languages
OSD Language English
Menu Language Default
Subtitle Language Default
Audio Language Default
Instructions
Enter-Confirm Setup-Exit
Move …†
Select OSD
Language
English
Spanish
French
Czech
DF-L78E1P-SB 2005.5.20 4:17 PM ˘ ` 25 mac001 1200DPI 90LPI
To Next Page
Loading...
