Sanyo DVR-V100E - PREFERENCES; Parental Controls (Continued); Parental Country Code Selection

30
8 Press [ENTER] to confirm your rating selection, then press [SETUP] to exit
the menu.
Parental Control
Set Parental Level ADULT
Change Password
Set Parental Country Code
Instructions
Enter-Confirm Setup-Exit Move …†
Change Password
1
While ‘Preferences‘ is selected, press [†] to select ‘Parental Controls‘.
2 Press [ENTER]. The ‘Parental Controls‘ submenu appears.
3 Use […/†] to select ‘Change Password‘ then press [ENTER].
4 The ‘Change Password’ submenu appears. Enter your current 4-digit
password.
5 Enter a new 4-digit password. Re-enter the new password to confirm, press
[ENTER].
Parental Control
Set Parental Level ADULT
Change Password
Set Parental Country Code
Instructions
Enter-Confirm Setup-Exit Move …†
Parental Country Code
1
While ‘Preferences‘ is selected, press [†] to select ‘Parental Controls‘. Then
press [†] to select ‘Parental Country Code‘.
2 Press [ENTER]. Enter your current 4-digit password then press [ENTER].
3 Use […/†] to select the desired country and press [ENTER] to confirm.
Parental Control
Set Parental Level ADULT
Change Password
Set Parental Country Code
Instructions
Enter-Confirm Setup-Exit Move …†
Change Password
Current Code * * * *
Enter New Code * * * *
Confirm Code * * _ _
Instructions
Setup-Exit
• Master Password : If you forget your password, press 3,3,0,8 on the remote
control and then press [ENTER].
• Set the new password to something other than '0000'.
Parental Country Code
Please select Country for Parental Setup
Australia
Belgium
Denmark
Finland
France
Instructions
Enter-Confirm Setup-Exit Move …†
…
†
Initial Setup
DF-L78E1P-SB 2005.5.20 4:17 PM ˘ ` 30 mac001 1200DPI 90LPI