EasyManua.ls Logo

Sanyo FXCD-500 - Tape Operation

Sanyo FXCD-500
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TAPE OPERATION
109876
LOADING AND EJECTING THE TAPE
Insert a cassette into the tape slot 0 and the tape player will start
Press the eject button 0 to eject a tape
The system will return to the last mode
rn CAUTION
5
I
Only cassette
tapes
that play no longer than 90 minutes should be used Tapes exceeding
90 minutes are thin and may easily break
I
SELECTING TAPE MODE
lnsertingacassette into the tape slot as stated above will start the tape player
If radio, CD player or CD changer*
is in operation with a tape loaded, press the TAPE button 0 to switch to tape mode
* If a CD changer is connected
SWITCHING THE TAPE DIRECTION . . . . . . . . . . . . . . . . . . . . . .
3
Press the TAPE button 0
l
When the tape reaches the end of one side, the unit will automatically switch to the opposite side of the tape
FAST FORWARD AND REWIND . . . . . . . . . . . . . . . . . . . . . . . . . .
4, 5
Press the FF button @I to fast forward and press the REW button 0 to rewind the tape
Pressing the TAPE button 0 during fast forward and rewind operation resumes tape playing

Related product manuals