GB-11
VAS recording
VAS: Voice activated system
1. In the stop mode, press the n/MENU button for at
least 2 seconds.
2. Press the e or f button to select “VAS”.
3. Press the i button. VAS “OFF” blinks.
4. Press the e or f button to select “ON”. “VAS”
appears. Then press the i button.
5. Press the n/MENU button.
6. Press the m PAUSE/REC button.
Recording begins when you are speaking into the
microphone. When dictation stops for about 3
seconds, recording stops.
Press the e or f button to set the microphone’s
sensitivity when recording begins. The VAS sensing
level appears (“VAS 1” - “VAS 5”).
S
Hi
S
VAS Hi