GB-16
Using timer
Alarm timer
A file can be played (or the alarm sounded) at a designated
time. Place the file to be played in the ALARM folder
ahead of time (See page 31). The alarm will sound for 10
seconds if there are no files in the ALARM folder.
1. In the stop mode, press the n/MENU button for at
least 2 seconds.
2. Press the e or f button to select “TIMER”. Then
press the i button.
3. Press the e or f button to select “ALM On”. Then
press the i button.
4. Set the alarm on time (hour, minute) with the e or
f, and i buttons. When the minute setting is
completed, “TIMER” returns.
5. Press the n/MENU button.
When the alarm on time arrives, the alarm timer will be
activated.
S
Hi
S
Hi
PM
S
Hi
S
Hi
S
Hi
To Next Page
Loading...
Need help?
General
