GB-6
Hold function
This prevents operation from stopping by accidentally
pressing a button during recording or playback.
Set the HOLD switch to the left. The hold
function is engaged.
- If an operation button is pressed while the hold
function is engaged, “HOLd ON” will appear and
nothing else happens.
Set the HOLD switch to the right. “HOLd OFF” appears
and the hold function is disengaged.
To adjust the volume
Press the VOL. + or – button.
The volume level appears (VOL 0 to
VOL 20).
Selecting the beep sound (See page 19)
HOLD
VOL.
To Next Page
Loading...
Need help?
General
