14
MENU NAVIGATION MAP
CHANNEL ADJUSTMENT
SIGNAL SOURCE OPERATION Signal Source-
There are two categorizing:
●
Air
●
Cable
AIR(Antenna) Search:
It will search for analog and digital
channels that are broadcast over-the-air.
Cable Search
: It looks for analog cable channels and
unscrambled (Clear QAM) digital cable channels.
1無
Press the MENU key on the remote control to
display the Main menu. Use CURSOR ◄►key
to highlight the CHANNEL mode. Press OK.
2無
Base on the TV input to highlight Air or Cable.
Press OK.
3無
Use the CURSOR ▲(UP) and ▼(Down) key to
highlight the All option. Press OK. (A red hook will
appear beside the select item).
4無
Use the CURSOR ▲(UP) and ▼(Down) key to
highlight the Channel Scan. Press OK. Choose
the Scan to start the channel scanning.
ON-SCREEN MENU OPERATION
To Next Page
Loading...
