Why does my Sanyo PDG-DSU30 Projector have poor uniformity or shadows?
If your Sanyo Projector has poor uniformity or shadows, ensure the projection screen is clean and free of dirt, and that the projection lens is also clean. Measure the brightness under 'Bright' mode. Also, check rod alignment and the Engine Module.
How to troubleshoot audio abnormalities on Sanyo PDG-DSU30 Projector?
If your Sanyo Projector has audio abnormalities, ensure that the signal cables and source are working correctly and that your projector is not in 'Mute' mode. Check the projector's internal speaker and the Main Board.
Projection Specifications| projection screen size | 0.7 to 7.7 meters |
|---|---|
| projection distance | 1.2 to 12.0 meters |
| number of pixels | 800 x 600 |
Power| power supply | 100-240 V |
|---|---|
| power consumption normal mode | 255 W |
| input current | 2.5-1.0 A |
Operating Environment| operating temperature | 5 to 35 °C |
|---|---|
| storage temperature | -20 to 60 °C |
| humidity | 80% maximum (Non-condensing) |
Weight and Dimensions| weight | 2.3 kg |
|---|---|
| width | 286.3 mm |
| depth | 192.0 mm |
| height | 88.0 mm |
To Next Page
