Sanyo PLC PLC-ET30L User Manual

26
Top Control
Menu bar Pointer
(red frame )
Menu icon
Item data
Press the Point
7 8
buttons to adjust the
value.
SELECT
button
Pointer (red frame )
Press the Point
ed buttons
to move the pointer.
Item
How to Operate the On-Screen Menu
MENU button
SELECT button
POINT buttons
On-Screen Menu
Quit
Exit this menu.
The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to
the respective sections in this manual.
Use the Point
7 8 buttons to select a Menu icon.
Use the Point ed buttons to select an item to in the
selected menu.
Press the SELECT button to show the item data. Use
the Point
7 8 buttons to adjust the values.
To close the On-Screen Menu, press the MENU button
again.
Press the MENU button on the top control or the
remote control to display the On-Screen Menu.
✔Note:
 •TheselecteditemisnotactiveuntiltheSELECT
buttonispressed.
1
2
3
Remote Control
POINT buttons
SELECT button
MENU button
Basic Operation
Press the SELECT button here
to display previous items.
Press the SELECT button here
to display next items.

Sanyo PLC PLC-ET30L Specifications

General

Brand	Sanyo
Model	PLC PLC-ET30L
Category	Projector
Language	English