Sanyo PLC-XF46N - Page 19

- 19 -
A
A
A
A
Cabinet top
DEC Inlay-B
Push Latch-A
Hinge
Hinge
B
B
Hook
Remove the screws
(a)
Do not remove
2-3
Decoration Inlay-B, Push Latch-A, and Hinges removal.
1. Remove 4 screws-A and remove the 2 Hinges.
2. Remove 2 screws-B and remove the push Latch-A.
3. Remove DEC Inlay-B. (Unhook the Cabinet top and take the DEC Inlay off inside.)
Push part(a) and pull the DEC Inlay inside.
(See Fig.2-3, 2-3a)
Fig.2-3
Fig.2-3a
Mechanical Disassemblies
Lamp cover
Lamp cover
C
C
Push Latch-B
B
A
A
B
B
Button
B
Press
Cabinet top
2-2
Lamp cover and Push Latch-B removal.
1. Remove 2 screws-A and press button to open the Lamp cover.
2. Remove 4 screws-B and remove the Lamp cover.
3. Remove 2 screws-C and remove the Push Latch-B.
(See Fig.2-2, 2-2a)
Fig.2-2
Fig.2-2a