Sanyo PLC-XF46N - Page 23

- 23 -
4
-7
1. Remove 2 screws-A ,remove screw-B, remove screw-C and remove the Terminal Board D-SUB15.
2. Remove 2 screws-D, remove the Holders and remove the Earth BRKT Slot.
3. Remove 4 screws-F and remove the Handles.
(See Fig.4-7)
Mechanical Disassemblies
A
A
B
C
D
D
F
F
F
F
Terminal board D-SUB
Holder
Holder
Handle
Handle
Panel
Earth BRKT Slot
A
A
B
C
D
B
E
E
G
G
G
G
Terminal board Component
Holder
Holder
Handle
Handle
Panel
Earth BRKT Slot
4-6
Terminal Board Component disassemblies.
1. Remove 2 screws-A ,remove 2 screws-B, remove screw-C,remove screw-D and remove the Terminal Board
Component.
2. Remove 2 screws-E, remove the Holders and remove the Earth BRKT Slot.
3. Remove 4 screws-G and remove the Handles.
(See Fig.4-6)
Fig.4-6
Fig.4-7
Terminal Board D-SUB15 disassemblies.