Sanyo PLC-XF71 - Operating with Projector Control; Lens Shift Adjustment; Auto PC Adjustment

-27-
Mechanical Disassembly
5 Filter holder ass'y removal
1 Pull the filter cartridge upward off.
2 Remove 4 screws-A (T4x10) and 1 screw-B(M4x10), and then remove the filter holder
ass'y upward off.
5-1 Filter holder disassembly
1 Remove 1 screw-A (T3x14) and remove the wind sensor (S901).
2 Remove 2 screws-B (T3x8) and remove the filter switch board.
3 Remove 3 screws-C (T3x8) and remove the filter motor ass'y.
A
A
A
A
A
B
B
C
C
C
Filter cartridge
Filter holder ass'y
Filter holder
Wind sensor (S901)
Filter motor ass'y
Filter switch board
B