Sanyo PLC-XF71 - Auto PC Adjustment

-35-
Mechanical Disassembly
11 Optical unit removal
1 Remove 2 screws-A(M3x6) and remove the integrator-in ass'y upward off.
2 Remove 4 screws-B(M4x12) and 4 screws-C(T4x10) and remove the optical unit
ass'y upward off.
A
A
B
B
C
C
C
C
12 Optical lamp unit removal
1 Remove 3 screws-A(T4x10) and remove the optical lamp unit ass'y up-
ward off.
2 Remove each 1 screw-B(M3x10) and remove the thermal switches
(SW903 and SW904).
A
A
A
B
B
Integrator-in ass'y
Optical unit ass'y
Optical lamp unit ass'y
SW904
SW903
B
B
To:
FG Net
board